moto z2 force edition - Set Up Fingerprint Recognition
Notes:
A fingerprint is utilized to unlock the device.
For the fingerprint scanner to operate, hands must be clean and free of moisture, dirt, oil, lotion, dyes, etc.
Up to 5 fingerprints can be registered on the device.
From a Home screen, swipe up to display all apps.
Navigate: Settings > Security & location .
From the Device Security section, tap Fingerprint.
Tap Set up. If presented, enter the current PIN, password, or pattern then skip to step 7.
If presented with a lock screen notification, tap to choose your 'backup screen lock method': Refer to Set Up Screen Lock for assistance.
Fingerprint + Pattern
Fingerprint + PIN
Fingerprint + Password
If presented, select an option then tap Done.
Show all notification content
Hide sensitive notification content
Don't show notifications at all
Locate then tap the fingerprint sensor below the display to continue.
Review the info then tap Start.
Place your finger on the sensor until it vibrates then lift. Repeat this step as necessary until the process is complete. For greater accuracy, finger placement should vary slightly each time.